The correct installation process of the conveyor belt
The service life of the conveyor belt is mainly determined by its own quality, but some factors in use will also affect the service life of the conveyor, such as whether the conveyor belt is properly installed. Only when the conveyor belt is properly installed can it guarantee its working efficiency and service life. The conveyor belt manufacturer below introduces the process and precautions for the correct installation of the conveyor belt.
conveyor
1. Put a flexible shaft on the take-up core of therough top conveyor belt, and take the roll holder well. Before the upper frame, pay attention to the direction of the upper and lower cover rubbers.
2. The conveyor belt can be guided open in a workplace that is not suitable for loading, and the conveyor belt at the folding point has a radius of curvature large enough to prevent damage to the conveyor belt, and it is prohibited to place heavy objects on the Heat resistant conveyor belt at the folding position.
3. If the conveyor belt is replaced, the new belt can be connected with the old belt, and the unloading belt can be carried out simultaneously with the installation of the new conveyor belt.
4. For the horizontally running conveyor, the old conveyor can be cut off at any point, and the conveyor running in the oblique direction needs to select the cutting point to prevent the control from falling due to the self-weight.
5. After the position of the new belt is placed on the conveyor, fix one end of the tape with a clamp, then connect the roller to the rope of the pulley, and carry the belt to the conveyor by the traction device. When pulling, To prevent the conveyor belt from collapsing with the frame.
6. Fix one end of the conveyor belt to the conveyor frame with a clamp, and the other end is tensioned by the pulley until the conveyor belt does not sag significantly on the return roller.
7. Fix the tensioning device from the starting point of 100~150mm.